REACH RS+

Single-band RTK GNSS receiver with centimeter precision

For surveying, mapping and navigation.
Comes with a mobile app.

Distance up to 8 km
Update rate 14 Hz 

739 EURO* + TVA

BUY REACH RS+ IN OUR STORE

Surveying with ReachView

The easiest to use software for data collection that is available both for Android and iOS. With ReachView, you can collect and stakeout points and control all the features of Reach receivers, such as setting up a base station, logging RINEX data, and configuring NMEA output.

Point collection: create projects, save points, and export in industry standard formats

Record each position as a point with centimeter precise coordinates. Export projects and open them in GIS or CAD software like AutoCAD, ArcGIS, QGIS, and others.

Formats

DXF, CSV, GeoJSON, ESRI Shapefile

Stakeout: find points' position on the ground

Stakeout is used to find exact physical locations of points. They can be collected in ReachView or imported from other CAD or GIS software. 

Process of stakeout in ReachView has two steps: map view and bulls-eye. Map's purpose is to help you navigate to points on long distances. When you get closer than 40 cm to the point, bulls-eye turns on to make it easier for you to visually match receiver and point.

Formats

CSV, DXF and GeoJSONs

Logging in RINEX: record raw data, position, and base correction logs

Record raw data, position and base correction logs. Point collection and recording of RAW data are independent processes and can be used simultaneously. ReachView has a simple and intuitive interface for logging configuration and control.

We provide our version of RTKLib for PPK. It’s free and can be downloaded from our docs.

8 GB storage  

80+ days of logging at 1 Hz

Connectivity

Real-time position streaming in NMEA

Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.

Reach can turn on and off automatically
Reach is able turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach. For example, if the receiver is placed on the roof of a tractor.

Compatible apps

MachineryGuide, AgriBus-Navi, Efarmer, Agripilot and others

Position streaming

Interfaces

RS-232, TCP, Bluetooth

NTRIP or another Reach as a base station

Reach RS+ needs a base station as a source of corrections. That’s a requirement for centimeter accuracy in RTK and PPK. Base might be either another Reach RS+ receiver or NTRIP service. VRS is also supported.

Reach RS+ works seamlessly with other Reach receivers over any link.

.

Input and output corrections

Interfaces

TCP, LoRa, Bluetooth, RS-232, NTRIP

Formats

RTCM3

Max distance from a base

Up to 10 km in RTK 20 km in PPK

Reach RS+ is designed for harsh conditions. Dense forests, mountains, frost, heat and water, Reach can handle it all

IP67

Can be held 1 meter deep under water for half an hour.

-20ºС…+65ºС

Working temperature. Isn’t afraid of either heat or cold.

30 hours

Industrial LiFePO4 battery that doesn’t die on cold. Can charge over USB from a powerbank.

Specifications

en_GBEnglish
ro_RORomanian en_GBEnglish
{{{"type":"anchor", "ring":"0", "page":"0"}}}